(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headings is for the sole purpose of identification.
 

This site has moved...    Enter here.

41 Willy's  Part Pictures
All Items are American Made Fiberglass Components

                                        

(Click here for Body Install) 41 Body Shell - Heavy Duty   When building a Hot Rod you obviously want it as straight as possible.  So you bondo the floor pan - wheel wells & inner structure.....So as far as the body all you are left with is an overweight, rusty shell held together with old factory spot welds and body lead.  Our bodies are manufactured from extremely complex molds - which produce a rigid one piece unit.  The roof, quarters & firewall are generally stiffened with the use of internal ribbing.  In addition, your all new glass body can be made heavier or lighter (within reason) depending on your application.   Average body weight is only about 450#'s As far as body work, you need to scuff off the mold flashing - block sand - prime and paint.  The great part about owning a rigid glass body - is that you'll never have to worry about rust .  Once you apply your paint scheme that's it - just wash and wax.   Installation takes time!!  Whether you are installing just the body or an entire package, the bodies must be through bolted to your original frame.  For more detailed information please check out the truck cab install link here -   Click for Cab Installation  - While we understand that this is not a truck the basics of installtion ARE the same.
41 Door - Hinge Type  H/D Features:  - Smooth grey gellcoat finish both inside and out.  - Accepts original hinge, latch & regulator hardware.  - Double wall posts support upper window and track.  - Windows come blanked in and must be opened during     installation.  - Coremat® reinforced outer skin reduces "print thru".  - Power window kits can be used to install one piece glass.  - Original felts can be epoxied in the door post and side track.  - Door is supplied bare with no glass, mechanism, tracks or    hardware.
41 Trunk Lid H/D Features:  - 90 edges on both sides help to maintain body contours.  - Full inner frames - utilizes OEM hinge  - Fully lined - smooth gellcoated inner.  - Sandable gray gellcoated exterior finish.  - Coremat® reinforced skin aids in reduction of print-thru.

© Copyright 1987-date 
® U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc. 8823 Van Fleet Road Riverview Florida 33578