(U.S. Body Source is not affiliated with GM, Ford, Chrysler or any other vehicle manufacturer).
The use of names and headings is for the sole purpose of identification.
 

This site has moved...    Enter here.

70-72 Monte Carlo Part Pictures
All Items are American Made Fiberglass Components

                                        

70-72 Stock Hood H/D Features:  - 90 edges on both sides help to maintain fender    contours.  - Full perimeter inner frames - utilizes OEM hinge    & latch.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Coremat® reinforced skin aids in reduction of     print-thru.       H/D Construction      L/W Construction        Link to Scoops      Scoop Installation	70-72 Cowl Induction 2" Hood H/D Features:  - Styled after the original Z-28 design.  - 90 edges on both sides help to maintain fender    contours.  - Full perimeter inner frames - utilizes OEM hinge    & latch.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Coremat® reinforced skin.       H/D Construction         L/W Construction
70-72 4" Cowl Induction Hood H/D Features:  - Cowl Induction style design. (3.5" Clearance)    TECHHOOD™ design.  - 90 edges on both sides help to maintain fender    contours.  - Full inner frames - utilizes OEM hinge & latch.  - Fully lined - smooth gellcoated inner.  - Sandable gray gellcoated exterior finish.  - Coremat® reinforced skin reduces "print thru".  - Rear Baffle comes closed.       H/D Construction         L/W Construction                    Link to Scoop Opening
70-72 Trunk Lid H/D Features:  - 90 edges on both sides help to maintain     contours.  - Full perimeter inner frames utilizes OEM hinge     & latch.  - Sandable gray gellcoated exterior finish.  - Coremat® reinforced skin aids in reduction of      print-thru.
70-72 Front End                                                           (Click for Front End Installation Tips)  Features:  - Heavy Duty version - comes without a hinge kit - click above for all the "How To"    information.  - Grey exterior gellcoat finish can be easily sanded and prepared for finishing.  - Smooth 90° roll into wheel well openings, generally extends in a full  ¾".  - Headlight blanks require opening to install light bowl and trim.  - The units do come with mold flashing - which must be fared in before preparing for paint.   - The interior finish is Fiberglass texture - coated in black lacquer - it comes without wheel wells.     Wheel wells cannot be completely attached to the front end as they will interfere with engine &     firewall component, when hinging.  - Light Weight Version - is intended for racing applications and does not come with a hinge kit.      - These unit generally only weigh in at approx 30#  +/- .   IMPORTANT - Please specify the type of racing that the unit will be used for, so we may build and reinforce your unit accordingly. Units manufactured for "Street Racing" have a heavier roving on all edges to reduce the chance of tearing (under to stress of impact) and usually weigh 10 - 15# more than a Drag Racing unit.  Units manufactured for "Sand Drag" or "Baja" style racing are built so as to be midway between the Street Drag and the Street Race units.
70-72 Front Fender  Features:  - Smooth grey gellcoat exterior finish..  - Fiberglass texture, Black lacquer inner finish.  - Hood Jam holes, hinging and attaching    points must be opened for installation.  - Mold flashing must be removed for finishing.  - No other reproduction fiberglass fenders    come so complete.  - Fiberglass hood required for use with    fiberglass fenders.
71 Front & 70-72 Rear Bumpers L/W Features:  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Reinforced skin aids in reduction of print-thru.

73-77 Monte Carlo Part Pictures
All Items are American Made Fiberglass Components

                                        

73-77 Stock Hood H/D Features:  - 90 edges on both sides help to maintain fender    contours.  - Full perimeter inner frames - utilizes OEM hinge    & latch.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Coremat® reinforced skin aids in reduction of     print-thru.       H/D Construction      L/W Construction        Link to Scoops      Scoop Installation

73-77 Cowl Induction 2" Hood H/D Features:  - Styled after the original Z-28 design.  - 90 edges on both sides help to maintain fender    contours.  - Full perimeter inner frames - utilizes OEM hinge    & latch.  - Black lacquered fiberglass textured inner.  - Sandable gray gellcoated exterior finish.  - Coremat® reinforced skin.       H/D Construction         L/W Construction

© Copyright 1987-date 
® U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com, e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for commercial purposes without 
express written permission from U.S.Body Source inc. 8823 Van Fleet Road Riverview Florida 33578