Post Dated
Pro-Front End Installation
Pro-Front End Installation
.
| NOTE: This '70 Camaro
front end is a Bolt-On style Pro Front End Our 67-8 Camaro, 78-87 Malibu and a few other Pro Front Ends are Dzus on and installation can be quite a bit more involved. |
Customers Pics
 |
 |
 |
| If you really like early Camaros, but can't find one that old (that's not a rust bag)...this conversion may be your ticket. We started with a clean '80 Z-28 - 350 - 378 posi chassis. we took of the nose and about 350 pounds. | ||
 |
 |
 |
| Next we installed one of our heavy duty 70-73 Camaro Pro Front Ends. (part# FCAC-72) | ||
 |
 |
 |
| Be sure to remove the front tires before installing the NEW front end. To fit the new glass front end to our '80 model - the frame horn and parts of the core support had to be trimmed off a few inches. Once drilled and bolted in place the front grill & marker holes are opened and OEM equipment is installed. | ||
 |
 |
 |
| Next for the car will be a bolt on fiberglass truck lid with the '70 style spoiler. After all OEM pieces are installed all you are left with is..........Which Hood ?????? | ||
 |
Pictured: Above - 2" Cowl Induction Hood Above Right - Torpedo Hood Left - 4" Cowl Induction Hood Right - Aero Hood |
 |
| This project keeps people guessing. . . . "How did you put a large back window in that '70 Z-28?" | ||
 |
Tilting One Piece Front Ends is a much more involved procedure. Please see our Tilt Front End Installation section for more detailed information. |
 |
© Copyright 1987-date
® U.S.Body Source inc., usbody.com, carhoods.com, gr8hoods.com, techhoods.com,
e-bodyparts.com
The text and images in the afore mentioned sites may not be reproduced for
commercial purposes without
express written permission from U.S.Body Source inc. 9009 South East C.R. 325
Hampton Florida 32044